ASTM C673-97(2008) - 1.8.2008
 
Significance and Use

This classification defines a group of classes for use by those producing or purchasing fireclay and high-alumina plastic refractories and ramming mixes. Each class is limited by PCE, or alumina content, or both. This classification is frequently used as a specification when the properties shown in Table 1 are the only items specified.

TABLE 1 Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes

Class
PCE, min
Al 2O3,
%
High-duty31NRA
Super-duty32½NR
60 % alumina3557.6 to 62.5
65 % alumina35-3662.6-67.5
70 % alumina3667.6 to 72.5
80 % alumina3777.6 to 82.5
85 % aluminaNR82.6 to 87.5
90 % aluminaNR87.6 to 92.5
95 % aluminaNR92.6 to 97.5
100 % aluminaNR>97.5

A NR = not required.

 
1. Scope

1.1 This classification covers fireclay and high-alumina plastic refractories and ramming mixes that can be pounded or rammed into place to form a monolithic structure. The terms “plastic” and“ ramming mix” are generally intended to describe the workability of the material. In this regard, plastics are considered to be materials having a workability index of more than 15 % in accordance with Test Method C 181, while ramming mixes generally have less than 15 % workability by the same procedure.

 
2. Referenced Documents

C181-11(2025)

Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics

C24-09(2022)

Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials