ASTM C697-98 - 10.2.1998
 
1. Scope

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade plutonium dioxide powders and pellets to determine compliance with specifications.

1.2 The analytical procedures appear in the following order:

Sections Plutonium Sample Handling 8 to 10 Plutonium by Controlled-Potential Coulometry 2 Plutonium by Ceric Sulfate Titration 20 to 27 Plutonium by Amperometric Titration with Iron(II) 2 Nitrogen by Distillation Spectrophotometry Using Nessler 37 to 44 Reagent Carbon (Total) by Direct Combustion-Thermal Conductivity 45 to 56 Total Chlorine and Fluorine by Pyrohydrolysis 57 to 64 Sulfur by Distillation Spectrophotometry 65 to 73 Plutonium Isotopic Analysis by Mass Spectrometry 3 Rare Earth Elements by Spectroscopy 82 to 89 Trace Elements by Carrier-Distillation Spectroscopy 90 to 97 Impurity Elements by Spark-Source Mass Spectrography 98 to 104 Moisture by the Coulometric Electrolytic Moisture Analyzer 105 to 112 Total Gas in Reactor-Grade Plutonium Dioxide Pellets 113 to 120 Plutonium-238 Isotopic Abundance by Alpha Spectrometry 121 to 128 Rare Earths By Copper Spark-Spectroscopy 129 to 138 Plutonium Isotopic Analysis by Mass Spectrometry 139 to 147 Oxygen-To-Metal Atom Ratio by Gravimetry 148 to 156

1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Sections 6, 41, 50, 153, and 86.9 and144.5.1.

 
2. Referenced Documents

E115-97

Standard Practice for Photographic Processing in Optical Emission Spectrographic Analysis (Withdrawn 2002)

E60-11(2022)e1

Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).

D4327-17(2025)

Standard Test Method for Anions in Water by Suppressed Ion Chromatography

E130-08

Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes (Withdrawn 2013)

C1415-24

Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry

D1193-24

Standard Specification for Reagent Water

C1672-23

Standard Test Method for Determination of the Uranium, Plutonium or Americium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

C1637-21

Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis

C1625-24

Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry

C1432-23

Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis

C1068-21

Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

C859-26

Standard Terminology Relating to Nuclear Materials

C852-09

Standard Guide for Design Criteria for Plutonium Gloveboxes

C757-16(2021)

Standard Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors

C1307-21

Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry

E116-97

Standard Practice for Photographic Photometry in Spectrochemical Analysis (Withdrawn 2002)

C1235-99

Standard Test Method for Plutonium by Titanium(III)/Cerium(IV) Titration (Withdrawn 2005)

C1233-15(2021)

Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

C1206-02

Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration

C1168-23

Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis

C1165-23

Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode

C1108-23

Standard Test Method for Plutonium by Controlled-Potential Coulometry

C1268-23

Standard Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry