ASTM C698-98 - 10.2.1998
 
1. Scope

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides, (U, Pu)O2, powders and pellets to determine compliance with specifications.

1.2 The analytical procedures appear in the following order:

Sections Uranium by Controlled-Potential Coulometry 2 Plutonium by Controlled-Potential Coulometry 2 Plutonium by Amperometric Titration with Iron (II) 2 Nitrogen by Distillation Spectrophotometry Using Nessler Reagent 34 to 41 Carbon (Total) by Direct Combustion-Thermal Conductivity 42 to 53 Total Chlorine and Fluorine by Pyrohydrolysis 54 to 61 Sulfur by Distillation-Spectrophotometry 62 to 70 Moisture by the Coulometric, Electrolytic Moisture Analyzer 71 to 78 Isotopic Composition by Mass Spectrometry 3 Rare Earths by Copper Spark Spectroscopy 87 to 94 Trace Impurities by Carrier Distillation Spectroscopy 95 to 104 Impurities by Spark-Source Mass Spectrography 105 to 111 Total Gas in Reactor-Grade Mixed Dioxide Pellets 112 to 119 Tungsten by Dithio Spectrophotometry 120 to 128 Rare Earth Elements by Spectroscopy 129 to 132 Plutonium-238 Isotopic Abundance by Alpha Spectrometry 133 to 140 Uranium and Plutonium Isotopic Analysis by Mass Spectrometry 141 to 149 Oxygen-to-Metal Atom Ratio by Gravimetry 150 to 158

1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For specific safeguard and safety precaution statements, see Sections 38, 47, 99, and 155 and 145.6.1.)

 
2. Referenced Documents

D1193-24

Standard Specification for Reagent Water

D4327-17(2025)

Standard Test Method for Anions in Water by Suppressed Ion Chromatography

E60-11(2022)e1

Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).

C1165-23

Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode

E115-97

Standard Practice for Photographic Processing in Optical Emission Spectrographic Analysis (Withdrawn 2002)

E116-97

Standard Practice for Photographic Photometry in Spectrochemical Analysis (Withdrawn 2002)

E130-08

Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes (Withdrawn 2013)

C697-24

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets

C833-23

Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors

C852-09

Standard Guide for Design Criteria for Plutonium Gloveboxes

C859-26

Standard Terminology Relating to Nuclear Materials

C1068-21

Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

C1268-23

Standard Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry

C1206-02

Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration

C1233-15(2021)

Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

C1415-24

Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry

C1432-23

Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis

C1625-24

Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry

C1637-21

Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis

C1168-23

Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis

C1204-14(2023)

Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration

C1108-23

Standard Test Method for Plutonium by Controlled-Potential Coulometry

C1672-23

Standard Test Method for Determination of the Uranium, Plutonium or Americium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

C1817-24

Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry