| ASTM C703-72(2016) - 1.11.2016 | ||||||
| Significance and Use | ||||||
3.1 It is difficult to overemphasize the importance of the spall test. Porcelain enameled aluminum that fails this test will probably spall in service if subjected to moisture or weathering. | ||||||
| 1. Scope | ||||||
1.1 These test methods cover accelerated determination of the resistance of porcelain enamel coatings on aluminum alloys to spalling from exposure to moisture or weathering. Test Method A,2 using a 5 % solution of ammonium chloride, requires 96-h immersion while Test Method B,3 using a 1 % solution of antimony trichloride, is completed after 20 h of immersion. The spalling tendency is evaluated by the same criteria in both methods. While either method is suitable for magnesium silicon alloys, such as 6061, Test Method B is preferred for simple alloys or commercially pure aluminum, such as 1100. 1.2 The test methods appear in the following order:
| ||||||