ASTM C737-13 - 1.12.2013
 
1. Scope

1.1 This specification covers limestone suitable for use as dust in coal mines to reduce risk of coal dust explosions.

Note 1—Limestone can serve as a source of incombustible material in coal mine operations. Limestone is dusted onto coal exposures in sufficient amount so that not less than 65 % of all loose dust shall be limestone incombustible material. In return air courses the concentration of incombustible materials should be not less than 80 % of the total dust (MSHA 30 CFR 75.403). With such a concentration of limestone incombustible material, dust explosions cannot initiate or be propagated from nearby gas explosions. The limestone must be substantially dry in order to dust satisfactorily.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

 
2. Referenced Documents

C1271-99(2020)

Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

C1301-22

Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C110-24

Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C50-00

Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C25-24

Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime