ASTM C744-04 - 1.12.2004
 
1. Scope

1.1 This specification covers prefaced concrete masonry units with the exposed-to-view-in-place surfaces covered at the point of manufacture with resin, resin and inert filler, or cement and inert filler to produce a smooth resinous tile facing.

1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

 
2. Referenced Documents

C501-21

Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

D2486-17(2025)

Standard Test Methods for Scrub Resistance of Wall Paints

E84-26a

Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).

D2244-25

Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

C73-23

Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

C55-25

Standard Specification for Dry-Cast Concrete Building Brick

D822-23

Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

C1232-26a

Standard Terminology for Masonry (Includes all amendments and changes 8/20/2026).

C140-13

Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

C129-26

Standard Specification for Dry-Cast Nonloadbearing Concrete Masonry Units

C90-24a

Standard Specification for Dry-Cast Loadbearing Concrete Masonry Units (Includes all amendments and changes 1/20/2025).