1.1 This specification covers lime and limestone products suitable for the following chemical and industrial uses: Cooking rags | Sulfite pulp | Silica brick | Other water treatment uses | Calcium carbide | Grease | Calcium silicate products | Hypochlorite (bleach) | The following uses are addressed in other ASTM standards: Use | Standard(s) | Neutralization of Waste Acid (Test Methods) | C400 | Agricultural Liming Materials | C602 | Soil Stabilization | C977 | Asphalt | C1097 | Flue Gas Desulfurization (Test Methods) | C1318 | Drinking Water Softening | C1529 | Waste and Wastewater Neutralization | C1529 | Wastewater Treatment Plant Residuals (Biosolids) Stabilization | C1529 and D6249 | 1.2 The type designations in Table 1 signify the following: Limestone, high-calcium—CL | Limestone, dolomitic—DL | Limestone, magnesian—ML | Quicklime, high-calcium—CQ | Quicklime, dolomitic—DQ | Quicklime, magnesian—MQ | Hydrated lime, high-calcium—CH | Hydrated lime, dolomitic—DH | Hydrated lime, magnesian—MH | 1.3 The buyer shall designate the use, as listed in Table 1, and may specify one or more of the type designations in 1.1. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
C1318-15a(2020) | Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD) (Includes all amendments and changes 1/13/2021). |
C1097-19 | Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures |
C1529-19 | Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses |
D6249-19 | Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals |
C25-19 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
C50-00 | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
C110-20 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
C400-19 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
C602-23 | Standard Specification for Agricultural Liming Materials |
C977-18 | Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization |
|