ASTM F1314/F1314M-13a - 1.10.2013
 
1. Scope

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 22 chromium – 13 nickel – 5 manganese – 2.5 molybdenum stainless steel alloy bar and wire for surgical implants.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

 
2. Referenced Documents

A262-15(2021)

Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

A484/A484M-24b

Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings (Includes all amendments and changes 9/5/2024).

E45-25

Standard Test Methods for Determining the Inclusion Content of Steel

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

F138-19

Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

F746-04(2021)

Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

E18-25

Standard Test Methods for Rockwell Hardness of Metallic Materials

IEEE/ASTM SI 10

American National Standard for Metric Practice

AMS 2248

Chemical Check Analysis Limits, Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys

AMS 2630

Inspection, Ultrasonic Product Over 0.5 inch (12.7 mm) Thick

AMS 2632

Ultrasonic Inspection of Thin Materials

E10-23

Standard Test Method for Brinell Hardness of Metallic Materials

E407-23

Standard Practice for Microetching Metals and Alloys

E112-25

Standard Test Methods for Determining Average Grain Size

E354-25

Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

A555/A555M-23

Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

A751-25

Standard Test Methods and Practices for Chemical Analysis of Steel Products

E8/E8M-25

Standard Test Methods for Tension Testing of Metallic Materials