F714-24 | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
F771-99 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
F876-24 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
F877-24 | Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems |
F891-23 | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
F948-94(2001) | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
F1025-19 | Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe |
F1281-24 | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
F1335-04 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
F1473-23 | Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins |
F1488-14(2019) | Standard Specification for Coextruded Composite Pipe |
F1499-22 | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
D3139-19 | Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
D3261-24 | Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
D3309-96a | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems |
D3350-21 | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
F402-18 | Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings |
F405-13 | Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015) |
F441/F441M-23 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
F442/F442M-23 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) |
F1970-23 | Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems |
F1973-21 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
C114-23 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
D256-23e1 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023). |
D747-10 | Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) |
D790-17 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
D882-18 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
D638-22 | Standard Test Method for Tensile Properties of Plastics |
D648-18 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
D2683-20 | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
D2737-22 | Standard Specification for Polyethylene (PE) Plastic Tubing |
D2447-03 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) |
D2751-05 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
D2837-22 | Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products |
D2846/D2846M-19a | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems (Includes all amendments and changes 4/29/2019). |
D3035-22 | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
D2239-22 | Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
D2241-20 | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
D2282-99 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
D2444-21 | Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
D1003-21 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
D883-24 | Standard Terminology Relating to Plastics |
D907-15(2023) | Standard Terminology of Adhesives |
D1079-20 | Standard Terminology Relating to Roofing and Waterproofing |
D1238-23a | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer (Includes all amendments and changes 12/6/2023). |
D1488-00(2018) | Standard Test Method for Amylaceous Matter in Adhesives |
D1505-18 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
D1527-99 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
D1785-21a | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 (Includes all amendments and changes 10/8/2021). |
D2104-03 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) |
F1986-01 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
F1987-01 | Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems |
F1668-16(2022) | Standard Guide for Construction Procedures for Buried Plastic Pipe |
F1733-24 | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
F1760-16(2020) | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
F1924-19 | Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
F1948-20 | Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing |
D2513-20 | Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings |
D2661-21 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
D2666-96a | Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005) |
D2680-20 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
F2145-23 | Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing |
F2158-08(2016) | Standard Specification for Residential Central-Vacuum Tube and Fittings |
F2160-22a | Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) (Includes all amendments and changes 9/15/2022). |
F2176-17 | Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct |
F2623-24e1 | Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications (Includes all amendments and changes 3/8/2024). |
F2769-24 | Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems |
F2788/F2788M-21 | Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe |
F2818-10(2023) | Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing |
F2829/F2829M-21 | Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe |
F2905/F2905M-22 | Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications |
F2929-17(2021) | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
F2968/F2968M-21 | Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications |
F449-20 | Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control |
F628-23 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
F645-18b | Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems (Includes all amendments and changes 1/3/2019). |