ASTM D4028-07 - 1.12.2007
 
1. Scope

1.1 This specification covers the requirements for vinyl-coated fiber glass solar screening, and should help users recognize the characteristics of acceptable vinyl-coated fiber glass solar screening. This specification is limited in application to vinyl-coated fiber glass solar screening that is produced with a ribbed pattern woven in the warp direction. The applicability of this specification to vinyl-coated fiber glass type solar screening of a non-rib, a double rib (ribs in both warp and filling direction), or a filling rib construction is not known.

1.2 This specification shows the definitions, general requirements, and physical requirements for commercial standard vinyl-coated fiber glass solar screening designed and woven for installation in any dwelling, building, or structure for the purpose of providing a significant reduction in solar heat gain, while providing outward view and interior light. Solar screening provides a structure that has insect-restraining capabilities equivalent to standard insect screening.

Note 1—For information on standard insect screening, see Specification D 3656.

1.3 This specification shows the values in both SI units and inch-pound units. “SI” is the technically correct name for the system of metric units known as the International System of Units. “Inch-pound units” is the technically correct name for customary units used in the United States. The values stated in either SI units or in other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of the other without combining in any way.

1.4 The following precautionary caveat pertains only to the test method portion, Sections 8-21 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

D3775-17(2023)

Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics

D4909-89

Test Method For Color Stability Of Vinyl-Coated Glass Textiles To Accelerated Weathering (Withdrawn 1996)

D4912-07

Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth

D4963-04

Standard Test Method for Ignition Loss of Glass Strands and Fabrics

D5035-11(2024)

Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

D7018-04

Standard Terminology Relating to Glass Fiber and Its Products

E1-14(2025)

Standard Specification for ASTM Liquid-in-Glass Thermometers

Evaluating Procedure 1,

Grey Scale for Color Change.

Standard 74-1988,

Method of Measuring Solar-Optical Properties of Materials

CCC D-950

Specification, Dyeing and After Treating Processes for Cotton Cloths

MIL-STD-105D

Sampling Procedures and Tables for Inspection by Attributes

D76-99

Standard Specification for Tensile Testing Machines for Textiles

D123-23

Standard Terminology Relating to Textiles

D3374-07

Standard Specification for Vinyl-Coated Glass Yarns

D3656-07

Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns

D3773-07

Standard Test Methods for Length of Woven Fabric

D3774-18(2024)

Standard Test Method for Width of Textile Fabric