ASTM D7223-16 - 1.1.2016
 
1. Scope

1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract.

1.2 This specification defines one specific type of aviation turbine fuel for civil use in the certification of aircraft. The specification can be used as a standard in describing the quality of this aviation fuel from the refinery to the aircraft.

1.3 This specification does not include the fuels that are commonly used in aviation turbine engines. Those are listed in Specification D1655.

1.4 The aviation turbine fuel defined by this specification may be used in other than turbine engines that are specifically designed and certified for this fuel.

1.5 The use of EI/IP (Energy Institute/Institute of Petroleum) test methods is permitted. The user of this specification is referred to Specification D1655 (latest revision), Specification for Aviation Turbine Fuels, Paragraph 2, Referenced Documents and Table 1, Detailed Requirements of Aviation Turbine Fuels, Column 4, Test Methods, to determine the pairing of the IP test method with the particular detailed requirement, and to Section 11, Test Methods, to identify jointed standards and referee methods.

1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6.1 Exception—Units of pressure are also given in psi.

 
2. Referenced Documents

D2622-26

Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D2624-24

Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

D5006-25

Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

D5453-25

Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5972-25

Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

D6378-22

Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

D6469-24

Standard Guide for Microbial Contamination in Fuels and Fuel Systems

D5001-26

Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

AFRL-RQ-WP-TR-2013-0271

Determination of the Minimum Use Level of Fuel System Icing Inhibitor (FSII) in JP-8 that will Provide Adequate Icing Inhibition and Biostatic Protection for Air Force Aircraft Available from Defense Technical Information Center (DTIC), 8725 John J. Kingman Road, Ft. Belvoir, VA 220606218, http://www.dtic.mil/dtic, accession number ADA595127.

D4306-20

Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D4529-24

Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D4809-25

Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

D4952-23

Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

D3227-24

Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3241-26

Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

D3242-23

Standard Test Method for Acidity in Aviation Turbine Fuel

D3338-08

Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D3828-16a(2021)

Standard Test Methods for Flash Point by Small Scale Closed Cup Tester (Includes all amendments and changes 7/26/2021).

D3948-22

Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D4052-22

Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D4057-22

Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D4171-22

Standard Specification for Fuel System Icing Inhibitors

D4294-24

Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

D2887-24

Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

D86-23ae2

Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 11/4/2024).

D130-26

Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D381-25

Standard Test Method for Gum Content in Fuels by Jet Evaporation

D445-24

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D1266-18

Standard Test Method for Sulfur in Petroleum Products (Lamp Method) (Withdrawn 2025)

D1298-24

Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D56-22

Standard Test Method for Flash Point by Tag Closed Cup Tester

D1319-25

Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

D1322-25

Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel

D1655-26

Standard Specification for Aviation Turbine Fuels

D1840-24

Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

D2386-25ae1

Standard Test Method for Freezing Point of Aviation Fuels (Includes all amendments and changes 6/11/2026).