ASTM D7268-14 - 15.3.2014
 
Significance and Use

4.1 Upon mutual agreement between the purchaser and the supplier, seamless knit garments intended for this end use should meet all of the requirements listed in Table 1 of this specification.

4.2 It is recognized that, for purposes of fashion or aesthetics, the ultimate consumer of articles made from these fabrics may find acceptable products that do not conform to all of the requirements listed in Table 1. Therefore, one or more of the requirements in Table 1 may be modified by mutual agreement between the purchaser and the supplier.

4.2.1  In such cases, any references to the specifications should specify that: “This product meets ASTM specifications XXXX except for the following characteristic(s).”

4.3 Where no pre-purchase agreement has been reached between the purchaser and supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for a particular product.

4.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.

 
1. Scope

1.1 This specification covers the evaluation of specific performance characteristics of importance in seamless knit garments, including camisoles, panties, slips, girdles and swimwear.

1.2 The following safety hazards caveat pertains only to the test methods described in this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

D3136-25

Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products

D3786-08

Standard Test Method for Bursting Strength of Textile FabricsDiaphragm Bursting Strength Tester Method

D3787-16(2020)

Standard Test Method for Bursting Strength of Textiles´Constant-Rate-of-Traverse (CRT) Ball Burst Test

D7022-13

Standard Terminology Relating to Apparel

D629-15

Standard Test Methods for Quantitative Analysis of Textiles (Withdrawn 2024)

D123-23

Standard Terminology Relating to Textiles

D1230-25

Standard Test Method for Flammability of Apparel Textiles

D2905-97

Standard Practice for Statements on Number of Specimens for Textiles

D3107-26

Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns