ASTM D740-11 - 1.11.2011
 
1. Scope

1.1 This specification covers two types of methyl ethyl ketone that are used primarily as solvents in lacquers and industrial coatings, but also in adhesives, printing inks, lube oil dewaxing, and as chemical intermediates.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.

1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

 
2. Referenced Documents

D2804-22

Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography

E300-03(2022)

Standard Practice for Sampling Industrial Chemicals

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

D5386-24

Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

D4052-22

Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D1209-25

Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

D1078-11(2026)

Standard Test Method for Distillation Range of Volatile Organic Liquids

D268-25

Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

D1364-22

Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

D1353-13(2021)

Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

D1613-17(2023)

Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

PPP-C-2020

Chemicals, Liquid, Dry, and Paste: Packaging of Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://dodssp.daps.dla.mil.