ASTM E1161-95 - 1.1.1995
 
1. Scope

1.1 This test method provides a standard procedure for nondestructive radiographic examination of semiconductor devices, electronic components, and the materials used for construction of these items. This test method covers the radiographic testing of these items for possible defective conditions such as extraneous material within the sealed case, improper internal connections, voids in materials used for element mounting, or the sealing glass, or physical damage.

1.2 The quality level and acceptance criteria for the specimens being tested shall be specified in the detail drawing, purchase order or contract.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

E431-96(2022)

Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

E94-04

Standard Guide for Radiographic Examination

E1475-13(2023)

Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

E999-20

Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

E1817-08(2022)

Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E1255-23

Standard Practice for Radioscopy

E1316-24

Standard Terminology for Nondestructive Examinations

E1453-20

Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

E801-21

Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices

E1390-21

Standard Specification for Illuminators Used for Viewing Industrial Radiographs

E1254-13(2023)

Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

E1079-21

Standard Practice for Calibration of Transmission Densitometers

E2339-21

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E1000-16

Standard Guide for Radioscopy

E666-21

Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation

E1742-08

Standard Practice for Radiographic Examination

ANSI/ESD S20.20

ESD Association Standard for the Development of an Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices)

E1411-23

Standard Practice for Qualification of Radioscopic Systems

E2597-07

Standard Practice for Manufacturing Characterization of Digital Detector Arrays

E543-21

Standard Specification for Agencies Performing Nondestructive Testing

E1815-18(2023)

Standard Test Method for Classification of Film Systems for Industrial Radiography