ASTM E1266-12 - 15.12.2012
 
Significance and Use

4.1 This practice provides users with current methods for preconditioning, handling, processing, and means of characterizing the materials that are produced.

4.2 Lime and fly ash, and mixtures of lime and fly ash can be useful for treating hazardous and nonhazardous waste as follows:

4.2.1 Treating hazardous waste for potential resource recovery application,

4.2.2 Solidifying liquids and sludges that are banned from land disposal because of excess free liquid content,

4.2.3 Treating hazardous waste that may require treatment because of hazardous constituents prior to land disposal, and,

4.2.4 Treating hazardous waste for potential delisting to a nonhazardous waste status. Each one of these applications, however, must comply with requirements of the Resource Recovery and Conservation Act and the Hazardous and Solid Waste Amendments.

 
1. Scope

1.1 This practice provides descriptions and references of existing test methods and commercial practices relating to the processing of lime, fly ash, and heavy metal wastes in construction applications.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

40

CFR 268 Hazardous Waste Management System; Land Disposal Restrictions; and California List Constituents

D1633-17

Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

D1557-12(2021)

Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

C977-18

Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

C821-22

Standard Specification for Lime for Use with Pozzolans

C618-23e1

Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Includes all amendments and changes 3/21/2023).

C593-19

Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C400-19

Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

C311-11

Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

D2434-22

Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils

D2435-04

Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

D560-03

Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures (Withdrawn 2012)

D559-03

Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (Withdrawn 2012)

C911-19

Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

C25-19

Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C207-18

Standard Specification for Hydrated Lime for Masonry Purposes

C5-18

Standard Specification for Quicklime for Structural Purposes

C206-14(2022)

Standard Specification for Finishing Hydrated Lime

C110-20

Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C109/C109M-23

Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)

U.S.

Department of the Interior Earth Manual (Section Edition), 1974 Available from Bureau of Reclamation, Department of the Interior, Code D/7923A, P.O. Box 25007, Denver, CO 80225. http://www.usbr.gov.

EPA/540-2-86-001

Handbook for Stabilization/Solidification of Hazardous Waste, Superfund Document

E850-10

Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill (Withdrawn 2019)

D5681-23

Standard Terminology for Waste and Waste Management

D4318-17e1

Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (Includes all amendments and changes 4/17/2018).

1110-2-1906

Permeability of Fine Materials, Falling Head Aug. 12, 1987. Available from Department of the Army, U.S. Army Corps of Engineers, Public Depot, 2803 52nd Ave., Hyattsville, MD 20781.

D3877-08

Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures (Withdrawn 2017)

D3987-12(2020)

Standard Practice for Shake Extraction of Solid Waste with Water