ASTM E1605-04

ASTM E1605-04 - 1.11.2004

1. Scope

1.1 This terminology standard covers definitions for the following:

1.1.1 Terms that are commonly used in the field of management of lead hazards in facilities;

1.1.2 Architectural terms, particularly those associated with older wood-frame buildings; and,

1.1.3 Specialized terms that may be encountered by users in reports and notices that are generated during lead hazard management activities.

1.2 This terminology standard is supplementary to Terminology E 631.

1.3 Definitions adopted or derived from other documents include the following:

1.3.1 Some of the definitions in this Standard are adopted as exact copies from other sources. The source is briefly identified at the right margin following the definition and fully identified in Section .

1.3.2 Some of the definitions in this terminology standard are adapted from other sources. Changes in these definitions were made only to clarify the meaning, to incorporate related terms that also are defined in this terminology standard, or to ensure that the revised definition is consistent with those for related terms. The source is briefly identified with the words "adapted" at the right margin following the definition, and is fully identified in Section .

1.4 Terms within the definitions that are shown in boldface are defined in this terminology standard.

1.5 This terminology standard excludes the following:

1.5.1 Terms with a common dictionary meaning, except in cases where there is a specialized definition within the field of lead hazard management.

1.5.2 Terms that are used only in individual ASTM standards in which they are defined adequately, whether formally or by the context in which they appear.

2. Referenced Documents

C186-17	Standard Test Method for Heat of Hydration of Hydraulic Cement (Withdrawn 2019)
C859-24	Standard Terminology Relating to Nuclear Materials
D16-24	Standard Terminology for Paint, Related Coatings, Materials, and Applications
D123-23	Standard Terminology Relating to Textiles
D661-93(2019)	Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
D772-18	Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
D907-15(2023)	Standard Terminology of Adhesives
IEEE/ASTM SI-10	Standard for Use of the International System of Units (SI), the Modernized Metric System
40 CFR 745.223	Lead-Based Paint Poisoning Prevention in Certain Residential Structures-Definitions
ISO 9000–2000	Quality Management Systems Fundamentals and Vocabulary
E856-83(1998)	Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel
E1187-97	Standard Terminology Relating to Conformity Assessment (Withdrawn 2006)
E1227-88A	Terminology Relating to Chemical Analysis of Metals (Withdrawn 1991)
E1553-93	Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)
E1613-12	Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
E1644-21	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1728-16	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1777-09(2019)	Standard Guide for Prioritization of Data Needs for Pavement Management
E1792-20	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1796-20	Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1908-20	Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1914-07	Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis (Withdrawn 2016)
E1979-21	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E2052-99	Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008)
E2239-20	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2255-04	Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings (Withdrawn 2013)
E2271-05	Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
F141-23	Standard Terminology Relating to Resilient Floor Coverings
F221-98	Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom
F1156-94	Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001)
G40-22a	Standard Terminology Relating to Wear and Erosion (Includes all amendments and changes 11/11/2022).
D2864-21a	Standard Terminology Relating to Electrical Insulating Liquids and Gases (Includes all amendments and changes 12/14/2021).
D4214-23	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4538-21	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
E7-22	Standard Terminology Relating to Metallography
E131-10(2023)	Standard Terminology Relating to Molecular Spectroscopy
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
E344-23	Terminology Relating to Thermometry and Hydrometry
E456-13a(2022)	Standard Terminology Relating to Quality and Statistics (Includes all amendments and changes 4/21/2022).
E631-15	Standard Terminology of Building Constructions