ASTM E1620-97(2012) - 1.4.2012
 
1. Scope

1.1 In a broad sense, this terminology covers terminology associated with liquid particles dispersed in gas. The principal emphasis, however, is on particles produced by the process of atomization.

1.2 All terms, followed by their definitions, are arranged alphabetically. In addition, the terminology contains several tables wherein terms related to specific subjects are segregated and identified.

1.3 Within the broad scope, the following specific categories are included:

1.3.1 Terms pertaining to the structure and condition of individual particles or groups of particles as observed in nature.

1.3.2 Terms pertaining to the structure and condition of individual particles or groups of particles produced by an atomizing device.

1.3.3 Terms pertaining to atomizing devices according to the primary energy source responsible for spray development. (When more than one term is used for the same device or class of devices, the alternative term is followed by the preferred term.) Definitions of the devices may refer to their construction, operating principle, or distinctive spray characteristics. The atomizers, however, are not classified by their respective areas of application or end use. Moreover, the listed terms are generic and do not include brand names, trademarks, or proprietary designations.

1.3.4 Terms pertaining to statistical parameters involving particle measurement, particle size, and size distribution functions.

1.3.5 Terms pertaining to instruments and test procedures utilized in the characterization of liquid particles and sprays.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

TABLE 1 Summary of Atomizer Terms

Pressure Atomizer (hydraulic atomizer, pressure atomizing nozzle,

Lubbock nozzle

pressure nozzle, single-fluid atomizer)

variable orifice poppet nozzle (variable orifice pintle nozzle)

cone atomizer (cone spray nozzle)

hollow cone atomizer

Pneumatic Atomizer (air atomizing nozzle, blast nozzle, gas atomizer, gas-

solid cone atomizer (full cone nozzle)

liquid nozzle, twin-fluid atomizer, two-fluid atomizer)

deflector atomizer (flood nozzle, flooding nozzle)

air assist nozzle

dual orifice nozzle (duple nozzle)

airblast nozzle (air blast nozzle,

duplex nozzle

aerating nozzle)

piloted airblast nozzle (simplex airblast nozzle)

Fan Spray Atomizer:

prefilming airblast nozzle

even spray atomizer (even flow atomizer)

flat spray atomizer (flat jet atomizer)

External Mixing Pneumatic Atomizer

Laskin nozzle

Fog Nozzle

Internal Mixing Pneumatic Atomizer

Impact Atomizer: (impingement atomizer):

(aerating nozzle,

pintle atomizer

Nukiyama-Tanasawa nozzle,

splash cup atomizer

effervescent atomizer)

splash plate atomizer

Centrifugal Atomizer (rotary atomizer, slinger)

Impinging Jet Atomizer (impingement atomizer):

rotary cup atomizer (spinning cup atomizer)

doublet atomizer

rotary disk atomizer (spinning disk atomizer)

triplet atomizer

rotary wheel atomizer

Plain Jet Atomizer (orifice atomizer, plain orifice atomizer, single jet atomizer,

Vibratory Atomizer (vibrative atomizer)

straight stream nozzle)

electromagnetic vibratory atomizer

simplex nozzle

piezoelectric vibratory atomizer

Square Spray Nozzle

Berglund-Liu atomizer

sonic nozzle

Swirl Atomizer

ultrasonic nozzle

Swirl Chamber Atomizer (centrifugal pressure nozzle, swirl chamber

vibrating needle atomizer

atomizer)

vibrating reed atomizer

by-pass nozzle (bypass nozzle, flowback nozzle, recirculating nozzle, return

flow nozzle, spill nozzle, spill return nozzle, spillback nozzle)

Electrostatic Atomizer

dual orifice nozzle (duplex nozzle)

duplex nozzle

Shear Coaxial Injector

simplex nozzle

swirl coaxial injector

variable-area nozzle

Siphon Nozzle (aspirating nozzle)

Sonic Nozzle (sonic-whistle atomizer, ultrasonic nozzle)

TABLE 2 Characteristic Particle Diameters and Distribution Functions

Aerodynamic Diameter

Area (surface) Mean Diameter

DNf, DLf, DAf, DVf

De Brouckere Diameter

Equivalent Volume Sphere Diameter

Evaporative Diameter

Herdan Diameter

Linear (arithmetic) Mean Diameter

Log Normal Distribution

Mean Diameters

Normal Distribution

Nukiyama-Tanasawa Distribution

Relative Span

Rosin-Rammler Distribution

Sauter Mean Diameter

Square Root Normal Distribution

Stokes' Diameter

Upper Limit Log Normal Distribution

Volume Mean Diameter

 
2. Referenced Documents

E799-03(2020)e1

Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis (Includes all amendments and changes 4/17/2020).

D1356-20a

Standard Terminology Relating to Sampling and Analysis of Atmospheres (Includes all amendments and changes 9/7/2020).