ASTM E1775-01 - 10.10.2001
 
1. Scope

1.1 This standard provides guidelines for determining the performance of field-portable quantitative lead analysis instruments.

1.2 This guide applies to field-portable electroanalytical and spectrophotometric (including reflectance and colorimetric) analyzers.

1.3 Sample matrices of concern herein include paint, dust, soil, and airborne particulate.

1.4 This guide addresses the desired performance characteristics of field-based sample extraction procedures for lead, as well as on-site extraction followed by field-portable analysis.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

ISO Guide 30

Reference materials -- Selected terms and definitions

Laboratory Accreditation Guidelines: Measurement of Lead in Paint, Dust, and Soil (1992)

D7035-21

Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7144-21

Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids

D5438-23

Standard Practice for Collection of Floor Dust for Chemical Analysis

D6785-20

Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

D6966-18

Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

EPA 600/R-93/200

E1864-02

Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)

E1792-20

Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E1605-22

Standard Terminology Relating to Lead in Buildings

D7439-21

Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

E1613-12

Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)

E1644-21

Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1645-21

Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E1726-21

Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

E1727-20

Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination

E1729-20

Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination