ASTM E1894-97 - 10.6.1997
 
1. Scope

1.1 This guide provides assistance in selecting and using dosimetry systems in flash x-ray experiments. Both dose and dose-rate techniques are described.

1.2 Operating characteristics of flash x-ray sources are given, with emphasis on the spectrum of the photon output.

1.3 Assistance is provided to related the measured dose to the response of a device under test (DUT). The device is assumed to be a semiconductor electronic part or system.

 
2. Referenced Documents

E1249-15(2021)

Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources

E668-20

Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices

ISO/ASTM 51310

Practice for Use of a Radiochromic Optical Waveguide Dosimetry System

E170-23

Standard Terminology Relating to Radiation Measurements and Dosimetry

ISO/ASTM 51261

Practice for Calibration of Routine Dosimetry Systems for Radiation Processing

ISO/ASTM 51275

Practice for Use of a Radiochromic Film Dosimetry System

E666-21

Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation