ASTM E2126-02a - 10.10.2002
 
1. Scope

1.1 These test methods are designed to evaluate the shear stiffness, shear strength, and ductility of a wall assembly, including applicable shear connections and hold-down connectors, under quasi-static cyclic (reversed) load conditions.

1.2 These test methods are intended for wall assemblies constructed from wood or metal framing with solid sheathing or other bracing methods.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

D2395-17(2022)

Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials

D4444-13(2018)

Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

E564-06(2018)

Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

E575-05(2018)

Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

E631-15

Standard Terminology of Building Constructions

ISO 16670

Timber Structures--Joints Made with Mechanical Fasteners--Quasi-static Reversed-cyclic Test Method

ANSI/AF&PA NDS

National Design Specification for Wood Construction

D4442-20

Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials