| ASTM E2542-08(2014) - 1.6.2014 | ||||
| Significance and Use | ||||
12.1 The use of these acceptance tests will insure that organizations buying portable heaters will be assured the heaters meet certain performance requirements. | ||||
| 1. Scope | ||||
1.1 This specification is used to standardize the portable water heaters used on personnel decontamination lines to insure the heaters provide sufficient heated water for as long as they are needed during the emergency. Note 1—These heaters are not intended to be used for the decontamination for any other surface or material. Also, these heaters are intended to be portable and easy to use by first responders during a chemical, biological, radiological, nuclear, and explosive (CBRNE) event. 1.2 This specification contains a specification section and a test methods section so users need to refer to the section applicable to their needs when using this standard specification. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. Note 2—The U.S. first responder personnel using the equipment manufactured under this standard are not likely to be familiar with SI units so English units need to be included as part of the system documentation and shown on control panels for any equipment sold to U.S. organizations. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. | ||||
| 2. Referenced Documents | ||||
|