ASTM E633-00 - 10.5.2000
 
1. Scope

1.1 This guide covers the use of ANSI/ISA thermocouple Types K, N, R, and S for creep and stress-rupture testing at temperatures up to 1800°F (1000°C) in air at one atmosphere of pressure. It does not cover the use of sheathed thermocouples.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

E1129/E1129M-19

Standard Specification for Thermocouple Connectors

E344-23

Terminology Relating to Thermometry and Hydrometry

E1684-10

Standard Specification for Miniature Thermocouple Connectors

E292-18

Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

E230-03

Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples

E220-19

Standard Test Method for Calibration of Thermocouples By Comparison Techniques

E207-21

Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison With Reference Thermoelement of Similar EMF-Temperature Properties

E139-11(2018)

Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

E574-23

Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

E21-20

Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

E6-23a

Standard Terminology Relating to Methods of Mechanical Testing (Includes all amendments and changes 3/29/2023).