ASTM F1370-92(2005) - 1.4.2005
 
1. Scope

1.1 This specification covers self-contained, globe style, pressure-reducing valves for use in water systems of shipboard installations. These valves are limited to discharge pressure settings of 200 psig (1379 kPa) and below.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

The following precautionary caveat pertains only to the tests portion, Section , of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

B61-15(2021)

Standard Specification for Steam or Valve Bronze Castings

B150/B150M-19

Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

B637-23

Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

B689-97(2023)

Standard Specification for Electroplated Engineering Nickel Coatings

F467-13(2018)

Standard Specification for Nonferrous Nuts for General Use

F468-23

Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

F593-22

Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

F594-22

Standard Specification for Stainless Steel Nuts

ANSI B1.12

Class 5 Interference, Fit Thread

S75.02

Control Valve Capacity Test Procedure

B148-18

Standard Specification for Aluminum-Bronze Sand Castings

A125-96(2018)

Standard Specification for Steel Springs, Helical, Heat-Treated

A193/A193M-23

Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

A194/A194M-23

Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A231/A231M-18

Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

A276-13

Standard Specification for Stainless Steel Bars and Shapes

A313/A313M-18

Standard Specification for Stainless Steel Spring Wire

B62-17

Standard Specification for Composition Bronze or Ounce Metal Castings

B26/B26M-18e1

Standard Specification for Aluminum-Alloy Sand Castings (Includes all amendments and changes 4/2/2021).

A689-97(2018)

Standard Specification for Carbon and Alloy Steel Bars for Springs

B21/B21M-20

Standard Specification for Naval Brass Rod, Bar, and Shapes