ASTM F2021-00 - 10.6.2000
 
1. Scope

1.1 This specification covers requirements for plastic syphonic roof drain systems for industrial, commercial, public, and residential buildings. Requirements for materials, pipe, and fittings are included.

1.2 The interchangeability of pipe and fittings made by different manufacturers is not addressed in this specification. Transition fittings for joining pipe and fittings of different manufacturers is provided for in the referenced pipe and fitting specification.

1.3 In referee decisions, the SI units shall be used for metric-sized pipe and inch-pound units for pipe sized in the IPS system (ANSI B36.10). In all cases, the values given in parentheses are for information only.

1.4 The following safety hazards caveat pertains only to the test methods, Section 7 , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

D2751-05

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014)

D2949-22

Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

D3034-23

Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D3350-21

Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

E84-23d

Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).

E814-23a

Standard Test Method for Fire Tests of Penetration Firestop Systems (Includes all amendments and changes 7/26/2023).

E1966-15(2019)

Standard Test Method for Fire-Resistive Joint Systems

E2393-20a

Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers (Includes all amendments and changes 10/13/2020).

F412-23

Standard Terminology Relating to Plastic Piping Systems

F628-23

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F714-24

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

D1600-18

Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)

F1901-22

Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

B36.10

Standard Dimensions of Steel Pipe (IPS)

UL-1479

(see Test Method )

NFPA 5000 Building Code

F891-23

Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

D696-16

Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C with a Vitreous Silica Dilatometer

D1785-21a

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 (Includes all amendments and changes 10/8/2021).

D2661-21

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

D2665-20

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings