ASTM F2063-00 - 10.11.2000
 
1. Scope

1.1 This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, wire, flat rolled products, and tubing containing nominally 54.5 % to 57.0 % nickel and used for the manufacture of medical devices and surgical implants.

1.2 The values stated in SI units are to be regarded as the standard. The values given in inch-pound units are for information only.

 
2. Referenced Documents

ISO 9001

Quality Management Systems--Requirements Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.

IEEE/ASTM SI 10

American National Standard for Metric Practice

E1019-18

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques

E1097-12(2017)

Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

E1172-22

Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer

E1245-03(2023)

Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

E1409-13(2021)

Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

E1447-22

Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry

E1479-16

Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers

E1941-10(2016)

Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

F2004-17

Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

F2005-21

Standard Terminology for Nickel-Titanium Shape Memory Alloys

F2633-19

Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants

E4-21

Standard Practices for Force Calibration and Verification of Testing Machines

E8/E8M-24

Standard Test Methods for Tension Testing of Metallic Materials

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

F1710-08

Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

E112-13(2021)

Standard Test Methods for Determining Average Grain Size