1.1 This specification covers the design, manufacture, performance, operation, and testing of flow through treatment systems intended to process sewage or graywater, or both, generated during a ship's normal service. This specification is intended for use by designers, manufacturers, purchasers, and operators of shipboard environmental pollution control equipment to determine the requirements for equipment design, manufacture, purchase, and in-service operation. 1.2 The treatment system shall be capable of meeting the effluent requirements detailed in Section 4 with respect to a ship's operational area. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 9.1 This test method uses performance-based quantitative procedures for evaluation, inspection, and testing of sewage or graywater flow through treatment systems. |
F906-85(2020) | Standard Specification for Letters and Numerals for Ships |
F992-17(2022) | Standard Specification for Valve Label Plates |
E11-22 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
D1253-14(2021)e1 | Standard Test Method for Residual Chlorine in Water (Includes all amendments and changes 12/6/2021). |
B165-19 | Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube |
B117-19 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
A563-15 | Standard Specification for Carbon and Alloy Steel Nuts |
A307-21 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
F2044-09(2019)e1 | Standard Specification for Liquid Level Indicating Equipment, Electrical (Includes all amendments and changes 4/5/2019). |
F1511-18(2023) | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
F1510-21 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
F1387-23 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
F1323-14(2020) | Standard Specification for Shipboard Incinerators |
F1098-87(2019) | Standard Specification for Envelope Dimensions for Butterfly Valves´NPS 2 to 24 |
F1122-22 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
F1166-23 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
F1298-90(2023) | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
F1155-10(2019) | Standard Practice for Selection and Application of Piping System Materials |
F993-21 | Standard Specification for Valve Locking Devices |
F998-12(2022) | Standard Specification for Centrifugal Pump, Shipboard Use |
F1030-86(2023) | Standard Practice for Selection of Valve Operators |
|