ASTM F2798-09(2018)

ASTM F2798-09(2018) - 1.5.2018

1. Scope

1.1 This specification defines the requirements applicable to design, construction and testing of sealless, rotary positive displacement pumps with oil-through motors for ship lubricating oil service. The complete pump and motor assembly is referred to as canned lube oil pump (CLP). This specification applies to CLPs pumping oil with a SAE rating of 20–50.

1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

B271-11	Standard Specification for Copper-Base Alloy Centrifugal Castings
B505/B505M-23	Standard Specification for Copper Alloy Continuous Castings
B584-22	Standard Specification for Copper Alloy Sand Castings for General Applications
D2000-18	Standard Classification System for Rubber Products in Automotive Applications
A574-21	Standard Specification for Alloy Steel Socket-Head Cap Screws
A582/A582M-22	Standard Specification for Free-Machining Stainless Steel Bars
B23-20	Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)
B148-18	Standard Specification for Aluminum-Bronze Sand Castings
B152/B152M-19	Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B187M-97	Standard Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric] (Withdrawn 2002)
ANSI/HI 3.6	Rotary Pump Tests
1018	Carbon Steel
1045	Carbon Steel
1141	Carbon Steel
1144	Carbon Steel
4140	Chromium-molybdenum steel
4150	Chromium-molybdenum steel
4340	Nickel-chromium-molybdenum steel
NASM 17829
API Standard 676	Positive Displacement Pumps--Rotary
A159-83(2020)	Standard Specification for Automotive Gray Iron Castings
A193/A193M-23	Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-23	Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A216/A216M-21	Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A395/A395M-99(2022)	Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A449-14(2020)	Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A536-84(2019)e1	Standard Specification for Ductile Iron Castings (Includes all amendments and changes 5/3/2019).
A563-15	Standard Specification for Carbon and Alloy Steel Nuts
A27/A27M-20	Standard Specification for Steel Castings, Carbon, for General Application
A564/A564M-19a	Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes (Includes all amendments and changes 4/2/2021).
D3951-18(2023)	Standard Practice for Commercial Packaging
F912-11(2017)	Standard Specification for Alloy Steel Socket Set Screws
F1510-21	Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASME/ANSI B16.5	Pipe Flanges and Flanged Fittings