ASTM F381-15 - 1.7.2015
 
1. Scope

1.1 This safety specification covers the components, the assembly, and the use of consumer trampolines.

1.2 This specification is delimited in its application to trampolines of (1) a minimum bed size of 3300 in.2 (21 300 cm2), (2) a minimum height of 20 in. (51 cm), (3) intended for the purpose of continuous, vertical jumping activities and (4) intended for consumer use.

1.3 This specification is intended (1) to reduce the demonstrated hazards associated with the use of trampolines by consumers; (2) for trampolines used in a home environment by a single user; and (3) not to apply to institutional trampolines or trampolines intended for use on water. Trampolines that adhere to this specification are not recommended for use by children under six years of age.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the hazards associated with trampolines. The standard's existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.7 This specification includes the following sections and selected subsections.

Title

Section Number

Scope

 

1

Referenced Documents

 

2

Terminology

 

3

Included Components

 

4

Materials and Manufacture

 

5

  Design Requirements

 

5.2

  Performance Requirements

 

5.3

Performance Requirements

 

6

  Shock Attenuation

 

6.1

  Drop Test

 

6.2

   Drop test weight and impactor shape.

 

6.2.5

   Drop test procedure.

 

6.2.6

  Padding Attachment System Strength

 

6.3

   Padding Attachment System Strength Test
   Procedure

 

6.3.1

  Drop Test for Trampoline Edge Survivability

 

6.4

   Drop Test Procedure for Trampolines
   Where Frame Padding Is Not Required

 

6.4.1

  Crush and Shear Points

 

6.5

  Ultraviolet (UV) Resistant Materials Test

 

6.6

  Static Load Tests

 

6.7

   Static Load Test on Trampoline Bed

 

6.7.1

   Static Load Test on Trampoline Frame

 

6.7.2

   Procedure for Static Load Tests

 

6.7.4

Information Packet:

 

7

  Packet Marketing and Contents

 

7.1

  Assembly and Installation Instructions

 

7.2

  Care and Maintenance Instructions

 

7.3

  Warning Information

 

7.4

  Use Instructions

 

7.5

Product Marking:

 

8

  Identification

 

8.1

  On-Trampoline Warnings

 

8.2

  Instruction Sign

 

8.3

Packaging and Package Marking

 

9

Access Devices:

 

10

  Trampoline Ladders

 

10.1

  Ladder Warning

 

10.2

Keywords

 

11

Appendix

 

 

 
2. Referenced Documents

D2240-15(2021)

Standard Test Method for Rubber Property—Durometer Hardness

F2225-15(2020)

Standard Safety Specification for Consumer Trampoline Enclosures

F2774-09(2020)

Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material

AATCC Method 169

ANSIZ535.4

Product Safety Signs and Labels

D638-22

Standard Test Method for Tensile Properties of Plastics

Technical Requirements for Determining a Sharp Metal or Glass Edge in Toys and Other Articles Intended for Use by Children Under 8 Years of Age

F355-23

Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play

F1487-21

Standard Consumer Safety Performance Specification for Playground Equipment for Public Use

B117-19

Standard Practice for Operating Salt Spray (Fog) Apparatus

16 CFR 1500.48