ASTM F382-99 - 10.10.1999
 
1. Scope

1.1 This test method covers static bend testing of metallic bone plates for strength, equivalent bending stiffness, and ductility.

1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

ISO?14602

Non-active surgical implants--Implants for Osteosynthesis particular requirements.

E1942-98(2018)e1

Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing (Includes all amendments and changes 8/14/2018).

F565-21

Standard Practice for Care and Handling of Orthopedic Implants and Instruments

E1823-23

Standard Terminology Relating to Fatigue and Fracture Testing

E467-21

Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

E4-21

Standard Practices for Force Calibration and Verification of Testing Machines

F1713-08(2021)e1

Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) (Includes all amendments and changes 12/8/2021).

F1472-23

Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

ISO 9585

Implants for Surgery--Determination of Bending Strength and Stiffness of Bone Plates

F1314-18

Standard Specification for Wrought Nitrogen Strengthened 22 Chromium-13 Nickel-5 Manganese-2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

F1295-23

Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

F983-86(2018)

Standard Practice for Permanent Marking of Orthopaedic Implant Components

F621-12(2021)e1

Standard Specification for Stainless Steel Forgings for Surgical Implants (Includes all amendments and changes 8/19/2021).

F620-20

Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

F565-21

Standard Practice for Care and Handling of Orthopedic Implants and Instruments

F543-23

Standard Specification and Test Methods for Metallic Medical Bone Screws

F139-19

Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

F138-19

Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

F136-13(2021)e1

Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) (Includes all amendments and changes 8/19/2021).

F90-23

Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

F86-21

Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants

F75-23

Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

F67-13(2017)

Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

E122-17(2022)

Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process